欢迎进入广州市睿承科技有限公司官网!

Contact Us
Hotline
020-84896579
Linkman:Mr. Hu
Phone: 13602702898
E-mail:dobplate@163.com
Address:Block 46 B, Dalong Road Section, Shiji Town, Panyu District, Guangzhou
Current Location:Home > English > Product > Pretreatment Products >
Zinc Alloy Electrolytic Degreasing Powder GC-8608E
浏览: 发布日期:2019-03-21
Applicable parameters:
 
Method:    Cathode and Anode Electric Removal of Oil
Dosage:     3-4% depending on the effect,                       P H: > 14
Testing:      Visual oil removal                                     temperature: 40-45 C
 
Usage method:
 
Pour clean water into the degreasing tank in proportion. When heated to 40 C, the degreasing powder is poured into the tank, stirred to dissolve completely, and then heated to the working temperature.
 
Management:

1. When the temperature of working fluid is lower than 40 C, the oil removal time should be prolonged or the concentration of oil removal powder should be increased.
2. When the degreasing effect decreases obviously, the surface oil and impurities deposit too much, and the working fluid should be re-grooved when it is aging.

3. Temperature should not exceed 65 degrees. If the temperature is too high, the product surface will dry up and the washing effect will become worse.